Understanding Your Broken Garage Door Spring

Understanding Your Broken Understanding Your Broken

Does your garage door have a faulty or broken spring? If yes, then this can be frustrating to you and the whole household.  

As you open and close the door, the springs do a lot of work like stretching. Sometimes, they even stay in a stretched position fully. The more strain you put on those springs, the more likely they are to completely fail. This will result in the rising and falling of your garage door unevenly and may cause it to crash down. 

The spring tension should be strong enough to keep a garage door in good working order. However, replacement is sometimes necessary and it should be done by garage door service professionals. Changing the broken garage door spring on your own is potentially dangerous and may cause serious injury.

Read on to learn more about your garage door spring including the reasons why they break.

Two Types of Garage Door Springs

The following two types of garage door springs are reliable and create the necessary counterbalance that makes garage doors operate smoothly. However, they are designated for various types of garages.

1. Torsion Springs

The most common type of garage door system is the torsion spring system. They wind around a shaft that is attached to the garage door by-way-of cable drums to a twisting force that causes rotation.

The garage door spring has tools like the winding bars which you need to safely wind and adjust the tension on your torsion springs. Each bar has an outside diameter of 0.5 inches on each end which fits winding cones mostly on residential doors. In addition, the size and weight of the doors determine the length of the torsion spring and the number of needed springs.

2. Extension Springs

This type of spring is attached to the cables or pulleys of the counterbalance assembly. As the garage door opens, the spring extends and creates a counterbalance that supports the door. Same with torsion springs, extension springs are different and depend on the garage door’s weight.  

Extension springs are more affordable and offer more functionality compared to torsion springs. However, torsion springs last longer and are safer than extension springs. No matter what spring you have, proper maintenance is required to keep them working in the best condition.

Garage Door Springs: What causes them to break?

You can’t sometimes avoid having issues with your door especially when the garage door spring breaks. You may hear sounds when opening or closing the garage door or it cannot be lifted even when using the emergency rope. In cases like this, you will need a replacement that should be done by a garage door spring repair expert. Check the following common culprits:

  • Closing and opening your garage door several times a day makes it susceptible to wear and tear. The garage door springs can last for an extended period but won’t last forever.
  • The common enemy of metals is rust. As time passes and since garage door springs are built with metal, rust can build up. The lifespan of the springs will be reduced and eventually weakens the coil on the door.
  • Poor maintenance causes a broken garage door spring. So before a significant issue arises, do regular maintenance. This can help in preserving your garage door springs and making them last longer.

Garage Door Spring Replacement: When is the best time?

Both types of garage door springs can last around seven to nine years. However, it will wear out faster depending on how often you use it. Remember, extreme caution is needed when doing the replacement and must be done by a professional. Here are some things to watch out for as to when you will replace a garage door spring. 

  • When you hear a loud bang, the sound is possibly coming from the unwinding of the spring.
  • There is a gap in the central part of the torsion spring, it means that it is broken.
  • When the garage door bends at the top, it means that there is a broken garage door spring.
  • The garage door’s entire weight drops down. 
  • When the door doesn’t open because the rope is pulled.
  • The door moves up the track, it will cause a crooked movement. This happens when only one spring is broken on the side.
  • When the mechanism of the door can’t carry it smoothly though it can lift the door but will cause jerky movements.

 Professional Garage Door/Spring Repair and Replacement Services

Some people think that replacing the garage door torsion springs is quite easy. However, there are things to consider like knowing the number of quarter turns in relation to the height of the garage door. Moreover, knowing the proper position of your body when trying to fix the door spring is another factor to consider to prevent injury. 

It is better to leave the repair and replacement of your broken garage door spring to an experienced garage door repair pro

Call us today, Overhead Door Company of the Inland Empire. We also provide commercial garage door maintenance and inspection services.



How To Fix Your Noisy Garage Door By Type Of Noise

How To Fix Your Noisy Garage Door By Type Of Noise

Your garage is an essential feature of your property. However, if you are dealing with a noisy garage door as it opens and closes, you should fix it immediately. It may require garage door maintenance or repairs. A property owner like you must not ignore those screeching and grinding sounds you hear.

With some fixes and consistent maintenance, you can prevent unwanted garage door noises from occurring. Inspect your garage door first to locate the cause of the noises before repairing the issue on your own. Remember, garage doors are weighty and pressurized, so DIY repairs can be dangerous. 

While you can do minor mendings to help keep your overhead door working well, some door issues will require you to seek help from a professional garage door technician. Read on to learn tips on how to fix a noisy garage door. 

Before You Begin the Repair Job…

Before fixing your noisy garage door, please make sure to protect yourself by taking the needed safety precautions. First, disconnect your garage door opener to avoid further problems if somebody tries to operate it while you’re troubleshooting the issue. And second, do not carry out any tasks that could harm or injure you. For complicated repair jobs, it is best to call a professional.

Learn to Fix Your Noisy Garage Door by Type of Noise

You hear your door squeaking, grinding, rattling, popping, or making other unusual noises. They are indeed irritating. What should you do? Well, you need to know the underlying causes of the issue. Here’s our guide on how to fix a noisy garage door. 


You can use some lubricant if you hear your garage door creating high-pitched squeaks. Grease the rollers and tracks thoroughly. Then, apply a silicone-based grease generously to the weather stripping placed at the base of the door, in between the panels, and around the frame of your overhead door. 


Insufficiently lubricated or deteriorated rollers will sometimes create a grinding noise. Consider applying a garage door lubricant to correct the undesirable noise. Contact a professional to replace the rollers for you if they are already worn out. 

Choose nylon rollers instead of metal ones. They are more silent. On top of that, there is no need to grease nylon rollers often, which makes them more efficient than metal rollers. 

Inspect the hinges on your garage doors closely. Worn-out hinges can also produce grinding or screeching noises and will have to be changed immediately to avoid unwanted accidents. 

Furthermore, do not adjust, repair, or remove hinges on your own. If you take out the bottom bracket, your garage door could collapse. Again, always seek assistance from a specialist if replacing your hinges is the only option. 

If the hinges are still in good shape, you can use lithium-based or silicone-based grease to silence them down. Never use WD-40 to fix the issue. This product actually takes off the grease rather than adding up lubrication.


Your overhead door contains lots of nuts, bolts, and screws. Opening and closing the door create vibrations that make these parts not fixed in place over time. And loose parts can cause the entire door to rattle. The good news is, you can simply tighten all these hardware pieces with a wrench and socket set.

However, you must not adjust those parts connected to your garage door’s spring system. Keep in mind that the springs are under high tension. Reckless handling of the springs can result in injury or even death. So, calling a garage door expert is the best choice. 

A garage door opener that uses a chain drive is another probable source of rattling. You may hear unwanted rattling noises once the chain has become very loose. In this situation, you will have to call in a garage door technician to secure it. 

If the chain drive is not loose and is still in good shape, you can silence the rattling sound by applying some grease. But before doing so, refer to the provided garage door manual first to see if your door’s model requires a particular type of lubricant. 

Chain drive openers generally create loud sounds. So, consider switching to a belt drive opener if you prefer minimal noise.  

  • POPPING Noises

Check the torsion spring if you hear popping noises every time you open and close your garage door. Gradually, torsion springs will start to lock up, and will eventually create big popping sounds. 

Applying a lubricant product may do the trick if the torsion spring is still in good shape. However, as we mentioned earlier, repairing or adjusting torsion springs can be very risky. So it’s best to leave it to the experts. 

Seek Help from a Professional

If your garage door is still producing unwanted noises after following the troubleshooting tips in this article, don’t be in two minds to let Inland Overhead Door Company deal with your door concerns. Our experienced team of specialists and technicians can absolutely find out the true cause of any garage door issue and solve it for you.

For more inquiries, or to make an appointment, contact us today. We are always available to serve you. 


6 Reasons Why Your Garage Door Won’t Close

6 Reasons Why Your Garage Door Won’t Close

Unfortunately, your garage door can sometimes experience issues particularly when it stops working. You tried to open the garage then pushed the button of your remote again to close it, but nothing happened. Your garage door won’t close! 

This is very inconvenient but there’s no need to panic. Since it is heavy and has complicated parts in it, things could go wrong.

Some issues are easy and you can solve them yourself. However, some issues will require professional repair. To help you ease your stress, check the list below for the most common reasons.

Please tell me why my garage door won’t close?

While some garage door issues are serious, they’re common. A door that won’t shut would mean a repair or simply require a maintenance service.

Check out the following reasons below and call an expert when you experience some issues. 

1) Photo Eye Sensor Issues

Safety sensors are installed to protect your family from accidents. If your garage door doesn’t close (or open), it can be an indicator that your sensor’s photo eyes are the problem. 

If they are out of alignment or need some adjusting, call a professional to assist you. Moreover, be sure to remove anything that would obstruct the beam. If the sensors are dirty, just simply clean them with a soft cloth. 

2) Check the Power Source

  • Someone might have turned off the power source to the garage door opener. Check and ensure that all wire connections are plugged in.
  • If the motor is still running but the door is not closing, check the disconnect switch. If the disconnect switch is enabled, open and close your garage door manually. A professional can also disable this switch for you.
  • The problem might also be with the transmitter batteries. If the batteries are dead, the transmitter can’t send signals to your garage system. You can either fix it yourself if you have the right tools. Or call a specialist to evaluate the transmitter or replace the batteries for you.

3) Check the Track

  • Blocked track: an object might be the cause of clog and blockage. Blocking the door will prevent it from closing or opening.
  • Track alignment: this is one of the most common issues. Your tract needs the correct alignment for your door to work properly. Gaps can also form between the door’s rollers and the track or even the track can bend. Repair is necessary in this case.

4) Check for Broken Torsion Springs

Torsion springs and cables are responsible for the movement of your garage door. However, a torsion spring can snap and cause the cables to break. This will lead to malfunctioning. Contact a professional to check and replace these parts. 

5) Check the Remote Control

If the door still won’t close, the issue might be from your malfunctioning remote control. You need to check its batteries and replace them if necessary. 

6) Limit Settings are Not Adjusted Properly

A limit setting is a programming mechanism that sends a signal to the opener and determines the amount of movement required to open and close a garage door. If it starts to close but opens back up again, the settings could be incorrect. Let a specialist inspect and adjust the limit settings.


Professional Commercial Garage Door Repair Service  

We hope to give you a better understanding of what may be happening when your door gets stuck. Knowing the cause will help you to avoid spending on unnecessary maintenance, or making the problem more serious.

When your garage door won’t close, rely on a team of certified technicians at Overhead Door Company of the Inland Empire. Our company has years of experience handling various repairs. We are available 24/7 to serve you better, even in times of emergency.

garage door won’t close

If your garage door won’t close, it might be because of these issues. Contact Inland Overhead Door Company for professional garage door repair services.


What Causes A Garage Door Opening Slowly And How To Fix It

What Causes A Garage Door Opening Slowly And How To Fix It

One of the most common questions we get from Inland garage door owners is, why is my garage door opening or closing (sometimes both) slowly. Every single day, garage doors need to do a lot of heavy lifting. This can cause the door to wear out and eventually open or close slowly. In some cases, it may require simple fixes and maintenance. Others may be due to the previous opener setting.

In this article, we will give you a better understanding of what causes garage doors to move slowly as well as possible solutions. Let’s also take a look at how long a garage door should take to open and close.

Average Opening and Closing Time Period of a Garage Door

In general, a garage door will be able to fully open or close between 12 to 15 seconds, though there are exemptions; like when your garage door is really heavy or it is made of a certain material. If you notice your garage door is opening or closing for 20 seconds or longer, then it’s time to get your door professionally checked. 

Why Does Your Garage Door Open Slowly

Here are the most common reasons your garage door is opening and closing slowly.

  1. The garage door is old 

Your garage door is not opening properly because of an old or outdated garage door and garage door parts. Old or worn-out torsion springs, rollers, hinges,, and others can affect the full working condition of your door. 

If you need to upgrade your garage door and its parts, contact the Overhead Door Company of the Inland Empire. We have a wide selection of modern garage doors and parts. 

  1. The garage door opener’s speed setting is too low.

Another possible reason your garage door is moving slowly is when the speed setting is switched to slow. Check the setting of your opener speed. Or, check the owner’s manual for a safe and easy way to adjust the door opener’s speed setting. 

  1. Improper lubrication

Poor lubrication is the most common cause of a garage door that won’t open or close fast enough. A garage door has different connected components and they create friction when they move together. To limit the friction and allow smooth operation between these components, it is important to lubricate your door.

If the garage door is not properly lubricated or it has worn down, it can slow down the opening and closing of your door. Also, over time, pulleys can wear out and springs can lose tension which leads to slower operation. 

Lubricating your Garage Door

It is crucial to use the right type of lubrication when lubricating your garage door. Use a silicone or lithium grease spray instead of WD-40. WD-40 can damage the lubricant needed for your garage door to operate properly. 

To lubricate your garage parts, spray the hinges completely, except the plastic hinges. Also, spray the springs, locks, and rollers. For nylon rollers, lubricate only the bearings and not the wheels. Clean and clear any debris on the tracks by wiping it with a wet sponge. 

Professional Garage Door Service 

If none of the issues above seem to be the cause of a slow garage door, it’s time to call a professional. A professional garage door service provider, like Inland Overhead Door Company, can assess your door and identify the main problem immediately.

Inland Overhead Door Company provides the best products and repair services in the entire Inland Empire. We have a team of experienced technicians who can immediately identify issues in your garage door system. Once the problem is identified, they will perform the necessary garage door repair. We also provide preventative maintenance. So, keep your business running optimally at all times with help from Overhead Door Company of The Inland Empire’s Preventive Maintenance Service Program.

To know more about our Preventive Maintenance Service Program, call us today. 


Why Should You Replace Your Garage Door Opener

Why Should You Replace Your Garage Door Opener

The garage door opener is the small, motorized device that is located above your garage door. It is an important piece of your door system that opens and closes a garage door. Unfortunately, garage door openers do not last forever. When damaged, it will be difficult or impossible to open or close your garage door. Keep reading to learn more about the reasons why you should replace your garage door. This article also includes information about how long do garage door openers last.

How Long Do Garage Openers Typically Last?

Like any other type of device, over time, garage door openers’ gears and parts can wear out. The average lifespan of a garage door opener is 10 to 15 years. This life expectancy can increase by keeping up with routine care. Not lubricated moving parts can cause the door to wear out quickly.

To ensure the door opener can last longer is to have it serviced with garage door opener experts. Their service will include the following;

1. A visual inspection of the door’s parts like rollers, cables, springs, and tracks.

2. Lubricating the moving parts for smoother operation.

3. Proper balancing of the door

4. Testing automatic reversal and more.


Why Do I Need To Replace My Garage Door Opener

If your garage door opener is aging and showing some signs of failing, then it is time to consider replacing it. Furthermore, modern door openers offer increased safety, security, and convenience. They might be a good reason to replace your opener even if yours is still working fine.

Added Safety

Since 1993, garage door openers have been equipped with a reverse mechanism. This feature comes with sensors or photo eyes. When an object or person enters into the door’s path while closing, the door will immediately stop and reverse direction.

If your garage door opener does not have this safety feature, it is highly recommended to replace it.

Improved Security

Because of the fixed-code system installed in older garage door openers, they are at a serious security risk. With a special device, a burglar can hack the code and gain access to your property. On the other hand, newer garage door openers have a rolling code system that changes every time it is in use. With this feature, thieves cannot easily duplicate the code and enter your property uninvited.


Newer models have certain features and functionalities that offer simplified operation.

One example is the wireless “smart home” feature. With a proper app installed on a mobile device, you can monitor your door and control its functions. There is no remote control necessary for this system. It can also alert you whenever a potential issue arises, no matter where you are located.

Another great feature of newer garage door openers is the battery backup. A battery backup system can save you and allow you to operate the door even during a power outage.

Quieter Operation

When garage door openers get older, they become noisier in operation. A new opener or modern one tends to run with lesser noise. A chain-drive opener can be quieter in operation. If you want an opener with the least noise during operation, choose between screw drives or belt-drive garage door openers.


Garage Door Opener Replacement in the Inland Empire

Overhead Door Company of the Inland Empire has a wide selection of modern and high-quality garage door openers. We have a team of professionals ready to attend to all your garage door opener needs and door services.

To learn more about our garage door products and services, contact us today.


Top 5 Garage Door Opener Problems 

Top 5 Garage Door Opener Problems

A garage door opener is a motorized device that controls the opening and closing of a garage door. You can mostly find it on the wall or ceiling above the garage door. Though garage door openers, with good maintenance, can last up to 15 years, they can be prone to different issues. The garage door opener problems can cause disruptions to the daily operations of your business. 

Some garage door opener problems are usually easy to understand and the solutions are pretty easy. However, if the problem seems complicated, you may contact a professional garage door repair company like Inland Overhead Door


Common Garage Door Opener Problems

Below are the most common problems you may encounter with your garage door opener and solutions that can help you fix the problem. 

Problem #1: Garage door remote control or wall switch does not operate the opener

If the door does not operate when using the remote control or pressing the wall switch, the reason could be the power source has been disrupted. In most cases, power disruption to the garage door opener might be because the opener itself has been unplugged or the fuse, breaker, or GFCI outlet that provides power supply to the opener circuit has burned out or tripped. 

Check the outlet and make sure that the cord is plugged in. Or, check to see if the outlet is working by plugging another electronic device into it. If the breaker or the GCFI outlet trips, it is a sign that there is a problem with the system and you need an electrician to check and repair it. For a burned-out outlet, it needs replacement. 

Furthermore, if the door opener’s motor has burned out or isn’t working at all, hire a garage door opener professional.

Problem #2: Garage door not closing all the way

If the garage door opens, but does not close all the way or immediately pops open again, it could be because of these reasons; the limit setting isn’t set properly and the photo-eye is blocked or needs adjustment. 

The limit setting needs adjustment

A garage door limit setting is another safety mechanism (aside from the safety sensor) that keeps people from being hit. If the setting is off, the door will close completely. But, if the setting is not right, the door won’t close properly and will automatically reverse to prevent damage. Adjust your garage door opener limit setting to stop your door from reversing.

The photo-eye is blocked or needs alignment

Modern garage doors have a photo eye located at the bottom of the door on each side. These eyes detect if a person or item is blocking the door all the way down. If the line of view is clear, the door will close smoothly and completely. But, if anything is blocking the line or if the eyes are misaligned, the door will not descend properly. As a result, the door will stop and reverse automatically. Make sure that the sight path is clear and the garage door sensors are aligned properly. 

Problem #3: Garage door Won’t Open With remote control or Keypad

If a wireless remote control or mounted keypad does not operate the garage door, the problems are pretty simple to solve. It is possible that the remote batteries are depleted or the signal between the transmitter and the opener is disconnected. 

If the door functions well with a wall-mounted switch, try to replace the batteries to the remote control. Furthermore, if the door does not operate even after placing new batteries in the remote, the signal might be disconnected. Move closer to the door and make sure that the antennae are hanging down from the motor. 

If none of them works, try reprogramming the remote control or keypad. Sometimes, the signal in the remote or keypad can lose and may need to be reassociated. 

Problem #4: Garage Door Won’t Open Completely

If the garage door opens and stops close to fully open, the issue is most likely the up-limit switch may need to be relocated closer to the motor unit. This switch is usually a simple touch-lever positioned near the motor unit at the end of the track. If the switch is too far away, the motor will stop the door from fully opening.

In some cases, this issue is not related to the garage door opener. For instance, broken or balky rollers can prevent the door from opening fully. Check and replace damaged rollers and lubricate rollers that are rusty.

Problem#5: The garage door opens, however, the motor won’t stop

This garage door opener problem usually occurs when you first install the opener. If your garage door opens, but the motor does not stop, you may need to move the up-limit switch farther from the motor unit. 


How To Manually Open A Garage Door

  1. Get a ladder and place it beneath the garage door’s operating chain.
  2. Find the red cord that is hooked to the lever and pull the cord until the lever is locked in the down position. The cord should release the door and allow you to move it. 
  3. Step down the ladder, then lift the door with your two hands. If the door won’t move, go back up and pull the cord harder.
  4. Once the door is off the ground, do not let it go. Prop the door with something to prevent it from sliding down. 

If the door is too heavy to lift, don’t hurt yourself. Call for help or contact garage door professionals to assist and help you with your garage door problems.

Inland Overhead Door is here to help

Overhead Door Company provides quality commercial and industrial garage door services in the Inland empire. We have a dedicated team of garage door experts ready to professionally fix any of your garage door problems.

Let our team take care of your garage door problems. Rest assured that we will provide you a lasting solution that will keep your garage door running for years. To know more about our garage door services, contact us today


Common Signs of A Broken Garage Door Spring

Common Signs of A Broken Garage Door Spring

Garage door springs are an important part of your overhead door. They hold everything together and keep the tension for the proper movement (opening and closing) of your garage door. If your garage door does not open smoothly, or jerks when opening, then it might be because of a broken garage door spring.

Garage door issues can cause great inconvenience to the daily operations of your business. At times, because of the weight of the garage door, these problems can pose danger to you and your employees. It is especially true if the problem is related to the overall operation of the garage door.

Knowing the signs of a broken spring can reduce potential damage or danger. In this article, you will have a closer at the most common signs of broken garage door springs. 

Signs of Broken Garage Door Springs

Here are the signs that your springs may be broken.

 1. Your Garage Door Opens Partially or Too Slowly

Garage door springs make all the hard work in the opening of your garage door. If your garage door has an automatic opener, and the springs are broken, your door will not open fully or even refuse to open. The force of the opener will keep the mechanism from opening the door higher than about 6 inches. This system will help prevent damage to the garage door opener or cause the door to fall unexpectedly. However, this will prevent your door from opening even if you pull the emergency release.

2. There is a Gap in the Garage Door Spring

There are one or two tightly wound springs in a torsion spring system. When any of the springs break, they leave a visible gap that is at times 2 inches wide. This occurs because the springs will stretch more during their operation, which causes them to separate more when they break.   

3. A loud bang comes from the garage

Garage door springs can break at any time and even if the door is not operating. When it happens, you may hear a loud noise or banging sound from the garage. This happens because garage door springs release a lot of energy and that energy is converted into sounds.

4. The door creates noise during operation

The regular use of the door can put more strain on the broken garage door, causing it to make unusual noises during closing and lifting the door. Garage door openers may groan, pop or even squeal.

5. The door closes too quickly

If one of the springs is no longer working, the door significantly closes faster than usual. This is because the entire weight of the door is being controlled by only one spring. 

6. The door is crooked or bent

There are two types of springs. One of them is the extension springs. When any of the extension springs are broken, the other side of the door, normally the top door section, is pulled faster than the other. Because of this the door might open crookedly or might get stuck in the tracks. 


What Causes Broken Garage Door Springs 

1. Wear and tear

The most common reason garage door springs fail is due to simple wear and tear. Garage door springs are manufactured and rated for about 10, 000 cycles (one cycle equivalent to opening and closing of the door). If you use your garage door as your main door or it is excessively used, it is best to get extended lifespan torsion springs. They are rated for 20,000 or more cycles.

2. Improper Maintenance

Garage door springs will eventually break, but good and proper maintenance can help prolong the life of your springs as well as warn you in case they are about to break. Aside from regularly lubricating the springs, check the door balance at least once every season. It is especially important in winter when most springs break out. 

3. Rust or corrosion

Rust that develops on the spring can shorten the spring’s lifespan. When the door moves back and forth, the rust can add more friction to the coils, which can also damage the coils. 

Professional Garage Door Repair and Spring Repair or Replacement Services

If you suspect that your garage door spring in your business is broken, never attempt to operate the door or repair the damage on your own. Instead, contact garage door professionals for repair or replacement services.

For professional commercial garage door services, installation and repair, trust Overhead Door Company of the Inland Empire.


The Advantages of Hiring Professional Commercial Garage Door Repair Service

The Advantages of Hiring Professional Commercial Garage Door Repair Service

In commercial properties, though commercial garage doors were built tough, they may take a lot of beating, which, over time, can deteriorate or damage the door. Business owners may have to deal with this situation either to repair the door on their own or hire an expert. The first option may look attractive at first, but hiring a professional commercial garage door repair service has a lot of advantages. Here are some advantages of hiring a repair professional. 

The Advantages of Hiring Professional Commercial Garage Door Repair Service

Quick and Cost-Efficient

A damaged overhead door can cause disruptions to your business, so you would want to have it repaired immediately. However, repairing a damaged overhead door on your own may require more time and effort than professional handling it. Primarily, because you don’t have enough tools and knowledge to do the job quickly and efficiently.  

Furthermore, a DIY repair might initially save you some money. However, when things go wrong, you might end up spending more on repairs. Instead, hire a qualified commercial garage door repair service provider to restore your door and ensure that the job is done in a timely and cost-effective manner.

Efficient and Successful Repairs

Even if you try to repair the door on your own, you might not be able to do the job perfectly. A minor problem may create a bigger mishap on your business’s usual operations. 

Garage door repair professionals have experienced servicing various garage doors in different settings, thus, they have enough skills and knowledge in addressing your repair needs. With their experiences, any of your overhead door repair needs can be addressed efficiently and ensures successful repairs. 

Access to the Latest Tools and Equipment

Repair professionals are equipped with the latest tools and technology that is utilized in handling any type of garage door issue. They are trained and knowledgeable on how to use these tools. With the latest technology, coupled with the expertise of garage door professionals, you are sure that you will receive a quality repair service.

A Go-to Resource in Case of Emergency

Garage door accidents can happen anytime (day or night) and, in some cases, they don’t show any signs before coming. But, if you have built a lasting relationship with a service provider, you know who to seek help in case of an emergency. 

Eliminate Risk of Injuries

Garage doors are highly dangerous. Handling broken springs or lifting doors requires professional skills and inexperienced individual handling may just lead to accidents. A report says, there are more than 20,000 garage door-related injuries that happen every year. This includes about 7,000 pinching injuries, over 2,000 crushing injuries, and 800 lacerations. 

Spare yourself and others from getting hurt while fixing a garage door. Instead, leave your garage door repair needs to the professionals. 


4 Factors To Consider When Choosing The Right Garage Door Company

While all garage door companies would claim to provide these benefits, not all of them will meet your expectations. When hiring a commercial garage door company, you should look for these factors;

  1. Years of experience. Their length of service to the business allows them to acquire more skills and expertise. 
  2. Insurance. A licensed garage door company should have any type of liability insurance. If any damage occurs during the repair work, this company will hold responsible and furnish the damage when requested. 
  3. License. Many garage door companies do not have the proper license to practice in their field. Make sure to work only with a licensed garage door to avoid another problem. You can verify their information on the company’s website. 
  4. Reputation. It is a company’s important asset. Choose a company that has a solid reputation. You can ask your friends and acquaintances or check online reviews to know the company’s previous work.  

Professional Commercial Garage Door Repair Service of Inland Overhead Door

Overhead Door Company of the Inland Empire has a team of certified Garage Door Repair technicians ready to handle your repair needs. We are available 24/7, so we can serve you even in times of emergency. Our company has years of experience handling a variety of garage door repairs for different companies, so rest assured that we will live up to your expectations. 



5 Common Commercial Overhead Door Problems


The commercial overhead door installed in your building is an important aspect of your business. At one point,  it adds aesthetic and value to your property. But, more importantly, your garage door ensures the safety of your office, your employees, and anything stored in there. Thus, commercial overhead doors are built to withstand daily wear and tear or heavy use or business operations. However, such doors can also bring about problems to business owners. In this article, you will get a closer look at the most common problems your commercial overhead door may encounter and how to deal with them. 

Common Commercial Overhead Door Problems

1. Broken Torsion Springs

Torsion springs help counterbalance the weight of your commercial door, allowing the operator to raise and lower the door with ease. When these components are broken, it will be difficult or even impossible for your operator to lift the door. A standard torsion spring is rated for a certain number of cycles, usually about 10,000 cycles. Thus, torsion springs can become damaged from use.

Solutions: While it may be tempting to make repairs on your own, it is best to leave this task to an overhead door professional. The garage door torsion springs have a lot of pressure and could put anyone who is not an expert at garage door systems in danger. 

2. Worn or Broken Rollers

Garage door rollers are wheels, with ball bearings, that help allows your door to run smoothly and quietly along the metal racks. These rollers can wear away over time due to accumulated debris or dirt and, at some point, lack of maintenance. When broken, it can lead to malfunctioning or unstable garage door which can also compromise the safety of its user.

Solutions: Keep your rollers free of any debris and frequently inspect them for wear and tear. Lubricating them can also help get things back and running. But, in case you are dealing with worn or damaged rollers, consult with a professional for garage door repair service. 

3. Damaged Cables

Cables play an important role in the efficient operation of a garage door, especially for doors with extension and torsion spring. Though cables are dependable and resilient, they can be damaged by wear and tear. When the cable is broken, the door will lean toward a broken cable side and will not function properly. 

Solutions: Visually inspect cables on a regular basis and call for professional help when if broken.

4. Dented or Damaged Panel

Since your garage door is an important part of the overall operation of your business, a damaged or dented panel should be repaired or replaced immediately. 

Solutions: You may have to replace the damaged sections with a new one, but you might also consider replacing it with a new door for better warranty options. 

5. Misaligned Tracks

Generally, commercial overhead doors run on metal tracks. When these tracks become worn out, damaged, or misaligned, the door will not function properly. The damage may get worse over time as the rollers can further ruin the tracks. Additionally, the garage door motor can possibly burn out while trying to operate on the tracks. 

Solutions: If you notice any damage, reach out to commercial overhead door professionals for repairs. Professionals will repair the tracks or replace the entire track when the damage is severe. 


Commercial Overhead Door Repair Services

If your commercial garage door needs professional attention, don’t hesitate to contact Overhead Door Company of the Inland Empire. We have professionals trained and experienced in working with different types of commercial garage doors. We also offer installation services, preventative maintenance services, and fire testing services. Contact us today to schedule a service call for your garage door. 


Choosing The Right Garage Door Opener For Your Home

Choosing The Right Garage Door Opener For Your Home

Garage door openers do not only provide convenience for easy access but they also offer improved security for your home. Today’s garage door openers are equipped with many smart features that can heighten their security features. But, with many of them available in the market, you might be confused about how to choose the right garage door opener for your home. So, here are some factors to consider when buying a garage door opener.

Things To Consider When Choosing The Right Garage Door Opener


Drive Options

The main thing to consider when choosing a garage door opener is the drive type. A drive type refers to the mechanisms that open and close the door. Here are 4 types of garage door openers.

1. Chain-drive openers

They are the most popular, durable, and affordable openers in the market. These drives are most ideal for heavily insulated garage doors, one-piece door,s or oversized ones. However, chain drives are often loud and clunky because of vibration and metal-to-metal contact, making it a problem when your garage is located under a room.

2. Screw-drive openers

They use a long threaded metal rod that looks like a screw to open and close the garage door. This type of opener has a few moving parts making it more reliable, faster, and quieter than a chain drive. But, a screw drive opener requires more maintenance. Usually, monthly lubrication of the screws is necessary to prevent the plastic teeth that catch the threading to corrode. This is also not suitable for larger, heavier doors.

3. Belt-drive openers

A rubber-like belt is used to operate the garage door, making it quiet in operation. Belt-drive openers can be used for light and even heavy materials and require less maintenance. However, this type of garage door opener is often more expensive than the others.

4. Direct-drive openers

Though this opener comes in an overhead rail with a chain, its motor moves along the track, not on the chain. Because of that, this type of opener is extremely quiet in operation and often comes with a lifetime warranty. Though, they are a bit costly.

5. Jack-shaft openers

These openers are mounted on the wall, often next to the garage door and use a motor that drives pulleys and the torsion bar to raise and lower the door. Because of its computerized system, jackshaft openers are the most expensive models of a garage door opener.

Horsepower Options

In addition to the type of opener, a horsepower output should also be considered. This is to determine the weight of a garage door an opener can lift. There are three levels of horsepower available for garage doors.

  • ½ HP models – this is the standard and most popular motor speed for most garage doors because it is cost-effective. This type of motor may be powerful enough to lift most doors, but it can easily wear out when paired with a one-piece, wooden door, or well-insulated door.
  • ¾ HP models – These motors are more capable of lifting heavier doors, such as an extra-insulated door or one-piece, wooden door. They are more durable and long-lasting, but you may have to spend more on extra power.
  • 1 HP models – These motors can provide the highest amount of power and efficiency. They are perfect for extremely heavy garage doors, like industrial doors and oversized ones. But, they may not be worth the added expense, if you are using a standard garage door.

Some Tips For Choosing A Garage Door Opener

  • Seek referrals from your family and friends who recently purchased an opener. They can give you feedback about the durability and quality of a garage door opener.
  • Check reviews online from customers. They can give you ideas about the pros and cons of a certain door opener.
  • If you already have some prospect models, comparing their features can help you curb your choices.
  • Lastly, make sure to focus on quality. They might be pricier but they can be a great investment.

Seek Professional Help

Since your garage door is a vital shield of your home, keeping it in good condition should be your number one priority, and that includes having a garage door opener that is perfect for your door. If you are still confused with which one is best for you or unsure how to proceed with the installation, you can always seek help from Inland Overhead Door. Our professionals are well-equipped and knowledgeable in choosing and installing the right opener for your home. To learn more about our services, contact us today.