,

Top 5 Garage Door Opener Problems 

Top 5 Garage Door Opener Problems

A garage door opener is a motorized device that controls the opening and closing of a garage door. You can mostly find it on the wall or ceiling above the garage door. Though garage door openers, with good maintenance, can last up to 15 years, they can be prone to different issues. The garage door opener problems can cause disruptions to the daily operations of your business. 

Some garage door opener problems are usually easy to understand and the solutions are pretty easy. However, if the problem seems complicated, you may contact a professional garage door repair company like Inland Overhead Door

 

Common Garage Door Opener Problems

Below are the most common problems you may encounter with your garage door opener and solutions that can help you fix the problem. 

Problem #1: Garage door remote control or wall switch does not operate the opener

If the door does not operate when using the remote control or pressing the wall switch, the reason could be the power source has been disrupted. In most cases, power disruption to the garage door opener might be because the opener itself has been unplugged or the fuse, breaker, or GFCI outlet that provides power supply to the opener circuit has burned out or tripped. 

Check the outlet and make sure that the cord is plugged in. Or, check to see if the outlet is working by plugging another electronic device into it. If the breaker or the GCFI outlet trips, it is a sign that there is a problem with the system and you need an electrician to check and repair it. For a burned-out outlet, it needs replacement. 

Furthermore, if the door opener’s motor has burned out or isn’t working at all, hire a garage door opener professional.

Problem #2: Garage door not closing all the way

If the garage door opens, but does not close all the way or immediately pops open again, it could be because of these reasons; the limit setting isn’t set properly and the photo-eye is blocked or needs adjustment. 

Plast The limit setting needs adjustment

A garage door limit setting is another safety mechanism (aside from the safety sensor) that keeps people from being hit. If the setting is off, the door will close completely. But, if the setting is not right, the door won’t close properly and will automatically reverse to prevent damage. Adjust your garage door opener limit setting to stop your door from reversing.

https://www.hackmankind.com/index.php/?ivy/1c1tfd.htm The photo-eye is blocked or needs alignment

Modern garage doors have a photo eye located at the bottom of the door on each side. These eyes detect if a person or item is blocking the door all the way down. If the line of view is clear, the door will close smoothly and completely. But, if anything is blocking the line or if the eyes are misaligned, the door will not descend properly. As a result, the door will stop and reverse automatically. Make sure that the sight path is clear and the garage door sensors are aligned properly. 

Problem #3: Garage door Won’t Open With remote control or Keypad

If a wireless remote control or mounted keypad does not operate the garage door, the problems are pretty simple to solve. It is possible that the remote batteries are depleted or the signal between the transmitter and the opener is disconnected. 

If the door functions well with a wall-mounted switch, try to replace the batteries to the remote control. Furthermore, if the door does not operate even after placing new batteries in the remote, the signal might be disconnected. Move closer to the door and make sure that the antennae are hanging down from the motor. 

If none of them works, try reprogramming the remote control or keypad. Sometimes, the signal in the remote or keypad can lose and may need to be reassociated. 

Problem #4: Garage Door Won’t Open Completely

If the garage door opens and stops close to fully open, the issue is most likely the up-limit switch may need to be relocated closer to the motor unit. This switch is usually a simple touch-lever positioned near the motor unit at the end of the track. If the switch is too far away, the motor will stop the door from fully opening.

In some cases, this issue is not related to the garage door opener. For instance, broken or balky rollers can prevent the door from opening fully. Check and replace damaged rollers and lubricate rollers that are rusty.

Problem#5: The garage door opens, however, the motor won’t stop

This garage door opener problem usually occurs when you first install the opener. If your garage door opens, but the motor does not stop, you may need to move the up-limit switch farther from the motor unit. 

 

How To Manually Open A Garage Door

  1. Get a ladder and place it beneath the garage door’s operating chain.
  2. Find the red cord that is hooked to the lever and pull the cord until the lever is locked in the down position. The cord should release the door and allow you to move it. 
  3. Step down the ladder, then lift the door with your two hands. If the door won’t move, go back up and pull the cord harder.
  4. Once the door is off the ground, do not let it go. Prop the door with something to prevent it from sliding down. 

If the door is too heavy to lift, don’t hurt yourself. Call for help or contact garage door professionals to assist and help you with your garage door problems.

Inland Overhead Door is here to help

Overhead Door Company provides quality commercial and industrial garage door services in the Inland empire. We have a dedicated team of garage door experts ready to professionally fix any of your garage door problems.

Let our team take care of your garage door problems. Rest assured that we will provide you a lasting solution that will keep your garage door running for years. To know more about our garage door services, contact us today

,

Common Signs of A Broken Garage Door Spring

Common Signs of A Broken Garage Door Spring

Garage door springs are an important part of your overhead door. They hold everything together and keep the tension for the proper movement (opening and closing) of your garage door. If your garage door does not open smoothly, or jerks when opening, then it might be because of a broken garage door spring.

Garage door issues can cause great inconvenience to the daily operations of your business. At times, because of the weight of the garage door, these problems can pose danger to you and your employees. It is especially true if the problem is related to the overall operation of the garage door.

Knowing the signs of a broken spring can reduce potential damage or danger. In this article, you will have a closer at the most common signs of broken garage door springs. 

Signs of Broken Garage Door Springs

Here are the signs that your springs may be broken.

 1. Your Garage Door Opens Partially or Too Slowly

Garage door springs make all the hard work in the opening of your garage door. If your garage door has an automatic opener, and the springs are broken, your door will not open fully or even refuse to open. The force of the opener will keep the mechanism from opening the door higher than about 6 inches. This system will help prevent damage to the garage door opener or cause the door to fall unexpectedly. However, this will prevent your door from opening even if you pull the emergency release.

2. There is a Gap in the Garage Door Spring

There are one or two tightly wound springs in a torsion spring system. When any of the springs break, they leave a visible gap that is at times 2 inches wide. This occurs because the springs will stretch more during their operation, which causes them to separate more when they break.   

3. A loud bang comes from the garage

Garage door springs can break at any time and even if the door is not operating. When it happens, you may hear a loud noise or banging sound from the garage. This happens because garage door springs release a lot of energy and that energy is converted into sounds.

4. The door creates noise during operation

The regular use of the door can put more strain on the broken garage door, causing it to make unusual noises during closing and lifting the door. Garage door openers may groan, pop or even squeal.

5. The door closes too quickly

If one of the springs is no longer working, the door significantly closes faster than usual. This is because the entire weight of the door is being controlled by only one spring. 

6. The door is crooked or bent

There are two types of springs. One of them is the extension springs. When any of the extension springs are broken, the other side of the door, normally the top door section, is pulled faster than the other. Because of this the door might open crookedly or might get stuck in the tracks. 

 

What Causes Broken Garage Door Springs 

1. Wear and tear

The most common reason garage door springs fail is due to simple wear and tear. Garage door springs are manufactured and rated for about 10, 000 cycles (one cycle equivalent to opening and closing of the door). If you use your garage door as your main door or it is excessively used, it is best to get extended lifespan torsion springs. They are rated for 20,000 or more cycles.

2. Improper Maintenance

Garage door springs will eventually break, but good and proper maintenance can help prolong the life of your springs as well as warn you in case they are about to break. Aside from regularly lubricating the springs, check the door balance at least once every season. It is especially important in winter when most springs break out. 

3. Rust or corrosion

Rust that develops on the spring can shorten the spring’s lifespan. When the door moves back and forth, the rust can add more friction to the coils, which can also damage the coils. 

Professional Garage Door Repair and Spring Repair or Replacement Services

If you suspect that your garage door spring in your business is broken, never attempt to operate the door or repair the damage on your own. Instead, contact garage door professionals for repair or replacement services.

For professional commercial garage door services, installation and repair, trust Overhead Door Company of the Inland Empire.

,

The Advantages of Hiring Professional Commercial Garage Door Repair Service

The Advantages of Hiring Professional Commercial Garage Door Repair Service

In commercial properties, though commercial garage doors were built tough, they may take a lot of beating, which, over time, can deteriorate or damage the door. Business owners may have to deal with this situation either to repair the door on their own or hire an expert. The first option may look attractive at first, but hiring a professional commercial garage door repair service has a lot of advantages. Here are some advantages of hiring a repair professional. 

The Advantages of Hiring Professional Commercial Garage Door Repair Service

Quick and Cost-Efficient

A damaged overhead door can cause disruptions to your business, so you would want to have it repaired immediately. However, repairing a damaged overhead door on your own may require more time and effort than professional handling it. Primarily, because you don’t have enough tools and knowledge to do the job quickly and efficiently.  

Furthermore, a DIY repair might initially save you some money. However, when things go wrong, you might end up spending more on repairs. Instead, hire a qualified commercial garage door repair service provider to restore your door and ensure that the job is done in a timely and cost-effective manner.

Efficient and Successful Repairs

Even if you try to repair the door on your own, you might not be able to do the job perfectly. A minor problem may create a bigger mishap on your business’s usual operations. 

Garage door repair professionals have experienced servicing various garage doors in different settings, thus, they have enough skills and knowledge in addressing your repair needs. With their experiences, any of your overhead door repair needs can be addressed efficiently and ensures successful repairs. 

Access to the Latest Tools and Equipment

Repair professionals are equipped with the latest tools and technology that is utilized in handling any type of garage door issue. They are trained and knowledgeable on how to use these tools. With the latest technology, coupled with the expertise of garage door professionals, you are sure that you will receive a quality repair service.

truncately A Go-to Resource in Case of Emergency

Garage door accidents can happen anytime (day or night) and, in some cases, they don’t show any signs before coming. But, if you have built a lasting relationship with a service provider, you know who to seek help in case of an emergency. 

Eliminate Risk of Injuries

Garage doors are highly dangerous. Handling broken springs or lifting doors requires professional skills and inexperienced individual handling may just lead to accidents. A report says, there are more than 20,000 garage door-related injuries that happen every year. This includes about 7,000 pinching injuries, over 2,000 crushing injuries, and 800 lacerations. 

Spare yourself and others from getting hurt while fixing a garage door. Instead, leave your garage door repair needs to the professionals. 

 

4 Factors To Consider When Choosing The Right Garage Door Company

While all garage door companies would claim to provide these benefits, not all of them will meet your expectations. When hiring a commercial garage door company, you should look for these factors;

  1. Olching Years of experience. Their length of service to the business allows them to acquire more skills and expertise. 
  2. Insurance. A licensed garage door company should have any type of liability insurance. If any damage occurs during the repair work, this company will hold responsible and furnish the damage when requested. 
  3. License. Many garage door companies do not have the proper license to practice in their field. Make sure to work only with a licensed garage door to avoid another problem. You can verify their information on the company’s website. 
  4. Reputation. It is a company’s important asset. Choose a company that has a solid reputation. You can ask your friends and acquaintances or check online reviews to know the company’s previous work.  

Professional Commercial Garage Door Repair Service of Inland Overhead Door

Overhead Door Company of the Inland Empire has a team of certified Garage Door Repair technicians ready to handle your repair needs. We are available 24/7, so we can serve you even in times of emergency. Our company has years of experience handling a variety of garage door repairs for different companies, so rest assured that we will live up to your expectations. 

 

,

5 Common Commercial Overhead Door Problems

5-Common-Commercial-Overhead-Door-Problems

The commercial overhead door installed in your building is an important aspect of your business. At one point,  it adds aesthetic and value to your property. But, more importantly, your garage door ensures the safety of your office, your employees, and anything stored in there. Thus, commercial overhead doors are built to withstand daily wear and tear or heavy use or business operations. However, such doors can also bring about problems to business owners. In this article, you will get a closer look at the most common problems your commercial overhead door may encounter and how to deal with them. 

Common Commercial Overhead Door Problems

1. Broken Torsion Springs

Torsion springs help counterbalance the weight of your commercial door, allowing the operator to raise and lower the door with ease. When these components are broken, it will be difficult or even impossible for your operator to lift the door. A standard torsion spring is rated for a certain number of cycles, usually about 10,000 cycles. Thus, torsion springs can become damaged from use.

Solutions: While it may be tempting to make repairs on your own, it is best to leave this task to an overhead door professional. The garage door torsion springs have a lot of pressure and could put anyone who is not an expert at garage door systems in danger. 

2. Worn or Broken Rollers

Garage door rollers are wheels, with ball bearings, that help allows your door to run smoothly and quietly along the metal racks. These rollers can wear away over time due to accumulated debris or dirt and, at some point, lack of maintenance. When broken, it can lead to malfunctioning or unstable garage door which can also compromise the safety of its user.

Solutions: Keep your rollers free of any debris and frequently inspect them for wear and tear. Lubricating them can also help get things back and running. But, in case you are dealing with worn or damaged rollers, consult with a professional for garage door repair service. 

3. Damaged Cables

Cables play an important role in the efficient operation of a garage door, especially for doors with extension and torsion spring. Though cables are dependable and resilient, they can be damaged by wear and tear. When the cable is broken, the door will lean toward a broken cable side and will not function properly. 

Solutions: Visually inspect cables on a regular basis and call for professional help when if broken.

4. Dented or Damaged Panel

Since your garage door is an important part of the overall operation of your business, a damaged or dented panel should be repaired or replaced immediately. 

Solutions: You may have to replace the damaged sections with a new one, but you might also consider replacing it with a new door for better warranty options. 

5. Misaligned Tracks

Generally, commercial overhead doors run on metal tracks. When these tracks become worn out, damaged, or misaligned, the door will not function properly. The damage may get worse over time as the rollers can further ruin the tracks. Additionally, the garage door motor can possibly burn out while trying to operate on the tracks. 

Solutions: If you notice any damage, reach out to commercial overhead door professionals for repairs. Professionals will repair the tracks or replace the entire track when the damage is severe. 

 

Commercial Overhead Door Repair Services

If your commercial garage door needs professional attention, don’t hesitate to contact Overhead Door Company of the Inland Empire. We have professionals trained and experienced in working with different types of commercial garage doors. We also offer installation services, preventative maintenance services, and fire testing services. Contact us today to schedule a service call for your garage door. 

,

Commercial Garage Door Maintenance Tips Business Owners Should Know

Commercial Garage Door Maintenance Tips Business Owners Should Know

Commercial garage doors play an important role in keeping a safe working environment, as well as ensuring the safety of the materials you store in your warehouse or workplace. Though garage doors are prone to get damaged or malfunction due to improper usage or lack of maintenance, there are several steps you can do to take care of your garage door. A well-maintained garage door can help ensure seamless performance as well as prevent costly repairs. Learn here the commercial door maintenance tips that can keep you from spending money on expensive repairs.

Commercial Garage Door Maintenance Tips

Aside from yearly maintenance visits, managers or even employees can perform visual inspections and basic tests to identify any potential problems with the commercial garage door.

1. Visually Inspect Your Garage Door

Check the door springs, rollers, pulleys, and any other hardware for any signs of damage. Look for frayed cables, bent hinges, loose screws or bolts, worn rollers, rust, and corrosion. If you suspect any problems, contact professionals at Inland Overhead Door immediately.

2. Lubricate The Moving Parts

Keeping the rollers, hinges and all other moving parts well-lubricated can extend the life span of your garage door. Apply a good amount of lubricant like white lithium grease and make sure to wipe off any excess grease. If any of the hinges or rollers are stuck, you can use a penetrating solution to free them. Spray the solution to those parts, clean them off and apply the lubricant. Furthermore, it is also a good idea to lubricate the spring system. Spray the grease on the garage opener’s chain or screw. If the torsion spring becomes rusty, wipe it off with oil.

3. Clear the Rollers Tracks

Accumulated debris can make it difficult for the rollers to slide smoothly every time your door operates. In other instances, larger debris can cause your rollers to pop off the track. So make sure to inspect and clean your rollers to ensure that they will work efficiently. Use a level to make sure the tracks are properly vertical along the vertical sections.

4. Tighten The Hardware

Over time, the hardware on your commercial door loosen up because of their consistent movement. When loose, your door jostles or even falls off its tracks completely. To prevent a more serious problem, tighten all the hardware. Use a socket wrench and a screwdriver to tighten any loose bolts. If you notice any damage to the hardware, call for professional help.

5. Test the Balance

Testing the balance of your door is very crucial to ensure the safety of your door and its opener. An unbalanced garage door will have to work harder and can shorten its lifespan. To test the door, pull the release handle on the automatic opener, then use the manual mode function. Lift the door until it is about halfway. If the door is in proper balance, it should remain in place without your help. If it is the other way around, carefully set it back down and contact professionals. When it comes to spring repairs, it is best to trust professionals.

6. Inspect the Auto-Reverse Feature

Modern commercial garage doors are now equipped with an auto-reverse feature. This safety feature is designed to stop and reverse the direction of the door every time it detects an object in its path or has hit an object while the door is closing. This system is triggered by a pair of photocells located on each side of the door or by a pressure sensor.

Test the photoelectric system by starting to close the door, then passing your leg in the direction of the door. If the door goes up again, then this system is in good condition. Furthermore, to test if the sensor is working properly, place a 2×4 board flat on the ground in the direction of the door. When the door closes and touches the board, it should reverse direction and go up again. If you notice any problems with your auto-reverse feature, schedule the repair with a professional.

Commercial Garage Door Preventative Maintenance Services

Keep your business running efficiently with Inland Overhead Door Company quality preventative maintenance. Our preventative maintenance service ensures that your door will function properly all year long. We have skilled technicians both minor and major repairs on doors, openers, and other hardware malfunctions. Contact us today to schedule inspections.

,

How To Manually Unlock Your Garage Door When The Power Is Out

How To Manually Unlock Your Garage Door When The Power Is Out

No wonder that automatic garage doors have provided convenience to their users. With an opener on hand, you won’t have to get in (or out) of your car to open or close your garage door, which is particularly useful during bad weather. However, circumstances like power outage can render your garage door useless and cause a great inconvenience. When this happens, do not panic. When the power is out, this article is about the steps you can take on how to manually unlock your garage door.

How To Manually Unlock Your Garage Door When The Power is Out

Most of the automatic garage doors are equipped with a manual release. This is a system that allows you to manually open your door in case of an emergency or when the power is out. You don’t need to contact a garage door company to solve this problem if you know how to manually open your garage door.

Open Your Garage Door Manually From the Inside

  • Find any deadbolts, switches, or locks near the outside of the garage door, make sure to disengage them. This prevents them from interfering with you manually opening the door.
  • Once they are unlocked, disconnect the power for the opener or remove the battery of the opener to successfully open the door.
  • Then, it is time to locate the emergency release cord. It is a red handle or cord that hangs at the center rail of the garage door track. It is attached to the trolley that joins the arm of the door to the center track. Please note that the emergency release cord should only be used when the garage door is completely closed.
  • Pull the emergency release handle in a downward motion. This will disengage the garage door from the trolley and allows you to open the door manually.
  • Now, with moderate force, lift the garage door. Pull straight from the bottom until the door goes up and stops moving. Make sure that the door is securely in place before letting it go or backing your car out of the garage.
  • Once you have managed to safely get your car out of the garage, close the door. If it has a lock bar, slide lock to prevent accidents.

Open Your Garage Door Manually From the Outside

  • Almost all garage doors are built with emergency release mechanisms. To unlock your garage door from the outside, you need to look for a small lock. This is located at the center near the garage door. This mechanism should have a key that corresponds to the lock.
  • Then, unlock the emergency release cord by turning the key and pulling out the lock tumbler. A cord is attached to the lock tumbler upon pulling the entire mechanism. Pull the cord, until your door turns into a manual mode.
  • Manually, lift up the door straight up and ensure that it stays open before you park your car in.
  • When you are inside, close the door completely and lock it.

 

How To Reconnect Your Garage Door Opener After A Power Outage

There are easy steps to reconnecting your garage door after a power outage. Follow the steps below.

  1. Once the power is restored, close the garage door completely. There should be no gaps seen between the floor and the door itself.
  2. Then, firmly press the garage door opener button. If your door has two separate buttons, one that opens the door and the other that closes it. Press the one that would close the door.
  3. Let the opener reconnect on its own and complete the process without interference. The chain should move the trolley into its proper position until it connects with the arm on the garage door.
  4. Your garage should now operate appropriately with just a click of the button. To ensure that everything is running smoothly, allow your door to operate at least twice.
  5. If your garage has no automatic trolley connected to the garage door arms, you can reconnect the opener manually. Simply pull on the emergency release handle toward the door and manually connect the garage door arm to the trolley of the door opener. Make sure to test the door using the remote.

Contact Overhead Door For Garage Door Repairs and Maintenance

In times of unexpected events, like a power outage, and you are faced with the inconvenience of operating your garage door, it would be a good idea to know how to manually open your garage door. However, if your garage door opener is still not reconnected after doing the steps above, you can seek help from our professionals.

Overhead Door of the Inland Empire is committed to providing excellent work and first-rate services. We have a team of skilled professionals ready to assist you in any garage door-related problems. We also offer a 24-hour emergency service. Call us to schedule your garage door repair today.

,

Understanding Commercial Doors

Understanding Commercial Doors

When you visit a building or an establishment, the first thing that you can see is their commercial door. Commercial doors are important as it gives the building maximum security it needs. Aside from protection, they also give the establishment a professional appearance. Commercial doors are durable and reliable and give the business owner peace of mind when it comes to the security of their business. 

Materials Used In Commercial Doors

There are different materials used in making commercial doors. These materials vary depending on the needs of the establishments.

1. Steel Doors

This is the most common door used in establishments such as schools, stores, and other commercial buildings, like warehouses and factories. It uses a locking system that helps provide a maximum level of security to a building.

2. Wooden Doors 

Wood doors are not only beautiful, but they are also energy-efficient and easy to maintain. This type of door is often used in an interior commercial application. However, wooden doors are not as durable as other materials and they are capable of handling severe weather conditions.

3. Aluminum with Glass Doors 

 These doors are a great entryway for commercial buildings. A lot of businesses choose this type of garage door because of its sleek, sophisticated, and clean character. Furthermore, aluminum with glass doors are not only durable, but they are also easy to maintain. A simple wiping or polishing is all it needs to maintain its appearance. 

4. Fiberglass Doors 

Because of their low repair and replacement cost, fiberglass doors are one of the most commonly used in school establishments. They are one of the most durable materials in the market. But, this type of door is often very costly.

5. Glass Doors

These doors have a decorative appearance that entices people passing by commercial space. They are made of safety glass so they are not fragile. However, this type of door requires costly maintenance. 

 

Types Of Commercial Doors

 

There are four basic types of commercial doors. These include;

1. Overhead Doors 

These are the most common type of doors that are suitable for garages or warehouse sheds. They are space-efficient and can be operated manually or with the use of a remote. Furthermore, these doors can be lifted upward via a rail or tack.  

2. Roll-up Doors

As the name says, these doors roll up to an overhead coil when lifted. Unlike the overhead door, roll-up doors use thinner slats that provide maximum flexibility allowing the door to move with ease. These doors are ideal in spaces where rails for overhead doors can be an obstruction or the area cannot accommodate the rails. Also, these doors can come in different sizes, shapes, colors, materials, and configurations. 

3. Fire Rated Doors

Similar to roll-up doors, fire doors can be lifted and lowered manually or with the use of a remote. However, these doors are more durable than a standard roll-up door. They are made from fire-defiant materials which make them a perfect door for establishments that are exposed to harmful chemicals like petrol. They are fire-resistant which helps prevent the fire from spreading throughout the building. 

4. Scissor Gates

These doors are manufactured from high quality and compact steel to provide ultimate protection. Because of that, scissor gates are the most common choice for banks, lending companies, and other related businesses. 

 

The Benefits of Using Commercial Doors

Using a commercial door for your business can benefit you in many ways.

  • Maximum Security

Commercial doors offer a great amount of security to a certain business or establishment. Because of the high-quality materials used in them, business owners rely so much on their capability of protecting their business from any intruders. 

  • Attractive Appearance

Because of technological advancements, modern commercial doors are made with professionalism and aesthetic designs. They are often available in many styles, sizes, paint, finishes, and materials. Commercial doors improve the curb appeal of a building. 

  • Durability

Manufacturers use high-quality materials in making commercial doors, so they are capable of handling the ordeal of a commercial or industrial building. They are able to withstand severe weather, daily wear, and tear, and even hazards and can last for many years with proper maintenance. 

  • Smooth Operation

Lastly, because of the development in the functionality of commercial doors, they can now be operated smoothly. You can raise or lower your door with the use of remote control. Furthermore, commercial doors today have an alarm system that can alert the owner in the event of a fire or emergency. 

 

Commercial Doors Of Inland Overhead Door Company

Commercial doors are a wise investment that you can benefit from in the long run. So, if you are in the market looking for a commercial door, contact our professionals at Overhead Door, Inland. We have a variety of commercial doors that can be suitable for your business. We also have experienced professionals who can help you with installation, maintenance, repairs, and more. Contact us on 909-572-8997.

 

,

Choosing The Right Garage Door Opener For Your Home

Choosing The Right Garage Door Opener For Your Home

Garage door openers do not only provide convenience for easy access but they also offer improved security for your home. Today’s garage door openers are equipped with many smart features that can heighten their security features. But, with many of them available in the market, you might be confused about how to choose the right garage door opener for your home. So, here are some factors to consider when buying a garage door opener.

Things To Consider When Choosing The Right Garage Door Opener

 

Drive Options

The main thing to consider when choosing a garage door opener is the drive type. A drive type refers to the mechanisms that open and close the door. Here are 4 types of garage door openers.

1. Chain-drive openers

They are the most popular, durable, and affordable openers in the market. These drives are most ideal for heavily insulated garage doors, one-piece door,s or oversized ones. However, chain drives are often loud and clunky because of vibration and metal-to-metal contact, making it a problem when your garage is located under a room.

2. Screw-drive openers

They use a long threaded metal rod that looks like a screw to open and close the garage door. This type of opener has a few moving parts making it more reliable, faster, and quieter than a chain drive. But, a screw drive opener requires more maintenance. Usually, monthly lubrication of the screws is necessary to prevent the plastic teeth that catch the threading to corrode. This is also not suitable for larger, heavier doors.

3. Belt-drive openers

A rubber-like belt is used to operate the garage door, making it quiet in operation. Belt-drive openers can be used for light and even heavy materials and require less maintenance. However, this type of garage door opener is often more expensive than the others.

4. Direct-drive openers

Though this opener comes in an overhead rail with a chain, its motor moves along the track, not on the chain. Because of that, this type of opener is extremely quiet in operation and often comes with a lifetime warranty. Though, they are a bit costly.

5. Jack-shaft openers

These openers are mounted on the wall, often next to the garage door and use a motor that drives pulleys and the torsion bar to raise and lower the door. Because of its computerized system, jackshaft openers are the most expensive models of a garage door opener.

Horsepower Options

In addition to the type of opener, a horsepower output should also be considered. This is to determine the weight of a garage door an opener can lift. There are three levels of horsepower available for garage doors.

  • ½ HP models – this is the standard and most popular motor speed for most garage doors because it is cost-effective. This type of motor may be powerful enough to lift most doors, but it can easily wear out when paired with a one-piece, wooden door, or well-insulated door.
  • ¾ HP models – These motors are more capable of lifting heavier doors, such as an extra-insulated door or one-piece, wooden door. They are more durable and long-lasting, but you may have to spend more on extra power.
  • 1 HP models – These motors can provide the highest amount of power and efficiency. They are perfect for extremely heavy garage doors, like industrial doors and oversized ones. But, they may not be worth the added expense, if you are using a standard garage door.

Some Tips For Choosing A Garage Door Opener

  • Seek referrals from your family and friends who recently purchased an opener. They can give you feedback about the durability and quality of a garage door opener.
  • Check reviews online from customers. They can give you ideas about the pros and cons of a certain door opener.
  • If you already have some prospect models, comparing their features can help you curb your choices.
  • Lastly, make sure to focus on quality. They might be pricier but they can be a great investment.

Seek Professional Help

Since your garage door is a vital shield of your home, keeping it in good condition should be your number one priority, and that includes having a garage door opener that is perfect for your door. If you are still confused with which one is best for you or unsure how to proceed with the installation, you can always seek help from Inland Overhead Door. Our professionals are well-equipped and knowledgeable in choosing and installing the right opener for your home. To learn more about our services, contact us today.

,

Top 5 Most Common Winter Garage Door Problems

Top 5 Most Common Winter Garage Door Problems

A garage can give you the ultimate convenience of not having to deal with dead batteries of your car or scraping off the snow on your windshield. Not only that, but you also won’t have to worry about getting into your car in the morning when you have to go to your work, because it is not freezing cold inside. These are just some benefits of having a garage to keep your car in winter. However, because of its direct exposure to inclement weather, it is probably not a surprise that the cold weather of winter can greatly affect your garage door. This is not uncommon even in areas with mild winter like in South California. Thus as a homeowner, you want to avoid such a scenario. But what exactly does cold weather affect your garage door? This article outlined the most common winter garage door problems, as well as the solutions you can take to prevent any damage. 

 

Most Common Winter Garage Door Problems

Problem #1: Metal Contracts

In general, any metal materials can contract in cold weather. This includes your garage door. When the temperature outside drops, all the metal parts in your garage door (spring, hinges, rollers, etc) can warp or tighten, which will then result in the difficult movement of the door. 

What To Do: Lubricate the spring, rollers, hinges, and other metal parts in your door to ensure that they can weather the cold. Regular maintenance is also crucial to have a functional garage door.

 

Problem #2: Frozen Door

While it is not very common in South California to have freezing weather, it is still possible to happen. The water or moisture that is caught at the bottom of your garage door can freeze when the temperature falls drastically. This can cause your door to lock up and frozen shut. 

What To Do: Fortunately, this problem is easy to identify and resolve. First, you should give your door a visual inspection. If you can see ice at the bottom of the door, then you are certainly dealing with a frozen door. You can use a hairdryer or any heat source to melt the ice and dry out the area to prevent it from freezing again. But, be careful not to overheat the metal parts to avoid damaging them. 

 

Problem #3: Hardened Grease

In most cases, lubricants are made to work under hot temperatures. That is why they work efficiently with high-powered machines or equipment. However, greases do not function properly when winter comes. The low temperatures can cause them to harden or thicken the grease which can result in the poor lubricant.

What To Do: Remove any hardened grease from the tracks and rollers and replace it with silicon-based lubricant. Silicone can withstand cold temperatures, so you are sure that your door will continue to function smoothly throughout the colder months.

 

Problem #4: Worn Weather Stripping

While a damaged weather stripping will not affect the opening mechanism of your garage door, it is a problem that needs immediate attention. The weatherstripping around the edge of your garage door helps keep the cold air out of your living space. However, cold weather and precipitation can damage this material and eventually let the outside temperatures and water to get into your home and cause serious damage and inconveniences. 

What To Do: Once you notice a rapid spike in your energy bill, check the weather stripping in your garage door. Replace it if necessary. 

 

Problem #5: Damaged Door Springs

Often, your garage door’s springs break because of wear and tear. But, in most cases, springs break during colder months because of the added tension and pressure of the chilly weather. The cold air can cause the springs to brittle and eventually break. Thus, it is important to have your garage door examined professionally before the winter season starts. 

What To Do: Unfortunately, a damaged garage door spring repair should never be a DIY and should be performed by trained professionals only.

 

Professional Garage Door Services

With proper preventative measures and regular maintenance, you are sure that your garage door will weather the freezing weather of winter. But, in case, your door has sustained damaged in winter, call in professionals of Overhead Door Company. 

Overhead Door is the leading garage door company in the Inland Empire. We offer quality garage door repair services, replacement, maintenance, and more. Our professionals will inspect all parts and pieces on your garage door, as well as tighten and lubricate them to ensure that they are in good working condition. 

 

We also offer emergency garage door repairs and so, we are available 24/7. Call Overhead Door Company, Southern California’s garage door professionals today!

 

, ,

How To Replace Your Garage Door Weatherstrip

How To Replace Your Garage Door Weatherstrip

Have you noticed water, rodents, dirt, and other debris inside your garage? If so, you likely have a damaged or missing garage door weatherstrip. Your garage door comes with a bottom seal that protects the interior of your garage. But, over time, these seals wear out and malfunction. 

Usually, garage door weatherstripping problems are an easy fix. However, it is often overlooked because it does not affect the mechanical function of a garage door. Yet, don’t be mistaken. They are definitely important.

In this article, we will give you some tips on how to replace a garage door weatherstrip and help you understand its importance to your garage door as well as your garage. 

 

Signs of Damaged Garage Door Weatherstrip

Over time, the seals around your garage door wear out and will need to be replaced. If you see signs of damage, make sure to act fast. Ignoring the damage may lead to a more serious problem. Keep an eye on the following.

  • Puddles of water near or around your garage door. 
  • A gust of air that comes through the garage door. 
  • Cracked, bent, or flattened seals. 

 

Replacing Garage Door Weatherstrip

Replacing a garage door seal is a simple task. But before you begin, examine your current garage door seals. Check the type of seal that is already there. Remember that there is no universal garage door seal. So, the seal that you need is based on the type of garage door you have. Make sure to take your time in the preparation process. Failure to do it will result in the difficulty of installing it. After that, you can begin working;

Step 1: Measure the seal

The first step is to know how much weather-stripping you will need to cover all edges of the garage door. Raise the garage door and measure the current seal you have. Do not remove the old garage door weather seal until you already have one for replacement. 

Step 2: Remove the old garage door seal

If there are gaskets screwed on the door, use a screwdriver removing both the screws and the gaskets. Do not put too much force on doing this to prevent damage to the garage door which can lead to a costly repair. 

Once you have removed the old garage door seal, clean the area with a wet rag to remove any dirt and debris. After that, cut the new weatherstrip using a razor knife. 

Step 3: Install the new seal

Carefully place the new seal to the bracket. It should fit tightly. Slide the gasket to the bracket and replace the seals. After that, cut the excess seal at each end of the panel. Be careful not to cut off too much length because you might not be able to get the required length. 

Step 4: Test the garage door

Once you are done putting the screws back in place and trimming the seals, test the garage door to make sure that it opens and closes properly. Check if the new door seal is sitting flush with the floor and see if there is any damage along the bottom of the door. 

 

How Important Is Weatherstripping

Weatherstripping is the process of sealing all the openings around a garage door to keep the weather out. It’s not only the wind that it keeps out but also rain and snow. 

While your garage door does the main work of protecting the interior of your home against rainwater, snow, and wind, garage door seals do an important job as well. Your garage door cannot perfectly fit in that opening, leaving a small space around. This space can allow the weather to creep inside your garage, but the weatherstrip stops that. Leaving a small gap or crack unsealed around your garage door can lead to serious damage, especially in colder days. When it rains, and your garage door is unprotected with a seal, the water can seep inside and eventually turn into a layer of ice. You might end up having trouble driving your car out of your garage.

Furthermore, the weather seals around your garage door, when installed and working properly, can improve the entire insulation of your home, helping you to reduce the risk of lost energy.

A weather seal around your garage door, though small, does a tremendous work of protecting your garage from elements. Thus, it is important that it is in good condition. 

 

Get Help From Professionals

 When you need assistance with your garage door, contact professionals at Inland Overheaddoor. We have skilled and trusted technicians who can assist you with the replacement and installation of the new weatherstripping. We will properly measure and ensure that the right type of material is used. Our technicians can also provide you a full inspection of your garage door to ensure that your door is in the best working condition. Contact us today to get a free repair estimate.